Published Articles

PUBLICATIONS

               

                Ochiai KT, Hojo S, Nakamura C, Ikeda H and Garrett N

                Impact of Facial Form on the Relationship Between Conventional or Implant-assisted  Mandibular Dentures and Masticatory Function;

                J. Prosthet. Dent 2011, 105:256-265

               

Williams BH, Ochiai KT, Baba T, and Caputo AA

                Retention and Load Transfer Characteristics of Implant Retained Auricular Prosthesis

                Int J Oral Maxillofac Implants. 2007 May-Jun;22(3):366-72.

               

Vo D, Ochiai KT, Sultan E, Hojo S and Caputo AA

                Effect of Abutment Design on Screw Loosening for Wide Diameter Implants

                The Bulletin of Kanegawa Dental College, March 2007; v. 35: 1, 3-8.

Ochiai, K.; Ozawa, S.; Caputo, A and Nishimura, R.

                Load Transfer to Implants Connected to a Natural Tooth with Varying Foundational Support

                J of Prosthodontic Research and Practice 2006 v5: 129-136

Kimoto K, Tanaka K, Aoki H, Ochiai KT and  Minoru Toyoda

Indirect Latex Glove Contamination and Its Inhibitory Effect on the Polymerization of Polyvinyl     Siloxane.

J. Prosthet. Dent. 2005; 93:433-8

Ochiai KT, Williams BH, Hojo S, Nishimura RD, and Caputo AA

                Effect of Palatal Support on Load Transfer for Various Implant Supported  Overdenture Designs.

                J. Prosthet. Dent. 2004: 91:421-7 

Hojo S, Ochiai KT, Sadowsky S, Toyoda , and Caputo AA

                Load Transfer by Magnetic and Resilient Attachments for Mandibular Implant Overdentures.

                The Bulletin of Kanegawa Dental College, March 2004, v.32, no.1, 15-19

                Hojo S, Ochiai KT, Toyoda M, Maruyama C, Ishida M, Matsuo E, Caputo AA

                The Effect of Removal Angulation on the Retention of Ball Attachments

                The Bulletin of Kanegawa Dental College, September 2003, v.31, no.2, 117-121

                Ochiai, K.; Ozawa, S.; Caputo, A and Nishimura, R.

Photoelastic stress analysis of implant-tooth connected prostheses with segmented and non-segmented abutments

                J. Prosthet. Dent. 2003 May;89(5):495-. 502          

Williams, B.; Ochiai, K.; Hojo, S.; Nishimura, R.; Caputo, A

                Retention of Maxillary Implant Overdenture Bar Designs

J. Prosthet. Dent. 2001; 86:603-7

                Ochiai, K.; Pedroche, D.; Nishimura, R. and Sheh, E.

                Fabrication of a Custom Silicone Tracheostomal Prosthesis

J. Prosthet. Dent. 2000; 83: 578-581

Nishimura, R.; Ochiai, K.; Caputo, A.; and Jeong, C.

                Photoelastic Stress Analysis of Load Transfer to Implants and Natural Teeth Comparing

                Rigid and Semi-rigid Connectors

                J. Prosthet. Dent 1999; 81: 696-703

PUBLICATIONS (ABSTRACTS)

               

Fung L, Hojo S, Teng CJ, Ochiai KT, Caputo AA

Evaluation of Resin Core Foundation for Endodontically Treated Teeth.

J Dent Res 2010; sp issue #3935,

Barcelona, Spain.  July 2010

Fung L, Teng CJ, Ochiai KT, Garrett N, Caputo AA

Attachment Evaluation of a Ceramic Retained Resin Post and Core Technique

February 2010; USC Student Research

Explorer J of USC Student Research

Ochiai, K, Nakamura, C., Ikeda, H.,., Garrett, N.

Relationships Between Facial Form and Alveolar Ridge Height

July 2008; Toronto IADR, J Dent Res     

Accepted for presentation and abstract publication

Ochiai, K, Nakamura, C., Ikeda, H.,., Garrett, N.

Comparison of  Normalized Facial Form Classifications and ProsthodonticFunction

                            J Dent Res 2008, sp issue. #0265

                            Dallas, TX April 2008

 

                            Ratner S, Ochiai K, Thy M, Takeoka G, Caputo AA

                            Condylar Stress Development During Saggital Split Osteotomy

                            Proceedings of J Prosthodontic Society

                            Oct 2007, Fukuoka, Japan

 

                            Hojo S, Ino S, Ochiai K, Hamano M, Kubo M, Matsuo R, Katsumata Y, Watanabe, Toyoda M.

                            Quantitative Assessment of Palatal Defect Rehabilitation with Phonation Evaluatioin using Measurement Analysis Software DSSF3 and a Visual Analogue Scale

                            Proceedings of the J Prosthodontic Society

                            Oct 2007, Fukuoka, Japan

                            Ratner S, Ochiai K, Thy M, Takeoka G, Caputo AA

Differential Stress Generation During Sagittal Split Osteotomy

Presented: Cont.European Division, International Association for Dental Research, Thessaloniki, Greece

Nakamura, C., Ikeda, H., Ochiai, K., Garrett, N.

Facial Form Classifications and Implant Denture Function

                            2007, Spring Scientific Session, California Dental Association

                Ochiai, KT, Sung E, Chung J, Caputo AA

                Effect of Remineralizing Agents on Enamel Microhardness After Bleaching

                J.Dent Res 2007;sp issue

                New Orleans, LA, March 2007

               

                Oganesyan T, Beumer J,  Ochiai KT, Caputo AA

                Splinting and Load Transfer by Internal and External Abutment Designs

                J.Dent Res 2007;sp issue

                New Orleans, LA, March 2007

Ochiai, KT, Ikeda H., Garrett N, Chaconas SJ.

Influence of Craniofacial Form on Masticatory Performance with Implant-assisted Overdentures

                Proceedings of the International Congress on Maxillofacial Rehabilitation

                July 2007,  Maui, HI.

               

                Oganasyan T, Beumer J, Dianati M, Ochiai KT, Caputo AA

                Splinting and Load Transfer by Internal and External Abutment Designs

J. Dent Res 2006 v. 85, sp.issue B : 2256

Brisbane, Australia; June 28- July 1, 2006

                Ikeda H, Ochiai KT, McDonald MJ, Caputo AA

Biomechanics of Modified Hawley Appliances For Space Closure

J. Dent Res 2006 v. 85, sp.issue B :1949

Brisbane, Australia; June 28- July 1, 2006

Hojo S, Ochiai KT, Sadowsky S, Toyoda M, Caputo AA

Load Transfer by Direct and Splinted Bar Implant Overdenture Attachments

J. Dent Res 2006  v.85, sp.issue B : 2244

Brisbane, Australia; June 28- July 1, 2006

                Ochiai KT, Ikeda H, Warkomski C, Caputo AA

                Biomechanics of Invisalign Splint and Modified Hawley Appliances

J. Dent Res 2006; v. 85, sp.issue B : 452

Brisbane, Australia; June 28- July 1, 2006

Nakamura H, Nakamura Y, Maruyama C, Ochiai KT, Tanaka Y, Caputo AA

                Comparison of Load Transmission by Magnetic and Stud Attachments, and RPI Retainer

                J. Jpn Prosthodont Soc. 49: 113 Special; May 2005 (2-3-44)

Nakamura Y, Nakamura H, Maruyama C, Ochiai KT, Tanaka Y, Caputo AA

                Load Transmission Characteristics of Removable Partial Dentures

                J. Dent. Res; v. 84, March (2005) 2914

                Ochiai KT, Williams BH, Nishimura RN, Petropolous VC, Caputo AA

                Retention and Load Transfer of Maxillary Implant Overdentures with Different Attachments.

                J. Jpn Prosthodont Soc. 48,  112  Special; October, 2004

                Williams BH; Ochiai K; Sugiura T; Caputo A

                Retention and Load Transfer  Characteristics of Implant Retained Auricular Prostheses

                J. Dent. Res;  March 2003 Abstract format

                Vo D; Ochiai KT; Sultan E; Caputo AA

                Effect of Abutment Design and Screw Loosening for Wide Diameter Implants

                J. Dent. Res:  2003 Abstract format

               

                Ochiai KT; Berroeta E; Williams BH; Hojo S; Caputo AA

Retention of Maxillary Implant Overdenture Bar Designs

Proceedings of the International Congress on Maxillofacial Rehabilitation

Okinawa, Japan:   October, 2002

Ochiai KT, Williams BH, Hojo S, Nishimura RD, and Caputo AA

                Effect of Palatal Support on Load Transfer for Various Implant Supported

                Overdenture Designs.

                J. Dent Res. 81, March (2002) 3166

                Kim S, Ochiai KT, Caputo AA, and Donovan TE

                Effect of Polymerization Temperature on the Transverse Strength of Autopolymerizing

Acrylic Resin

J. Dent Res.; 81, March (2002) 2672

                Ochiai, K.; Ozawa, S.; Caputo, A and Nishimura, R.

                Load Transfer to Implants Connected to a Natural Tooth with Varying Foundational Support

                J. Dent. Res. 79 (2000) 1208  

Williams, B; Ochiai, K; Hojo, S; Nishimura, R; and Caputo, A

                Retention of Maxillary Implant Overdenture Bar Designs

                J. Dent. Res. 79 (2000) 1228

Nishimura, R.; Ochiai, K.; Caputo, A.; and Jeong, C.

                Effect of Rigid and Semi-rigid Tooth-Implant Connections on Load Transfer

                J. Dent. Res. 77(1998) 2157

               

Nishimura, R.; Jeong, CM, Ochiai, K.; Caputo, A.

                Effect of Abutment Material Selection on Load Transfer to Tooth Connected Implants

                J. Dent Res. 77 (1998) 1655

               

Nishimura, R.; Schneider, S,; Julliard, G.,; Zimmerman, R; Ochiai, K.

                The Effects of G-CSF on Radiation Induced Oropharyngeal Mucositis

                2nd International Congress on Maxillofacial Prosthetics, Proceedings

                Seoul, Korea;  May 1996

                Ochiai, K.; Min, B.; Nishimura, R. and Caputo, A.

                Effect of Vacuum Mixing on Mechanical Characteristics of a Methyl Methacrylate Resin

                J. Dent. Res. 75 (1996)  317

                Ochiai, K; Leung, R.

                X-ray Dispersive Spectroscopic and Stereoscopic Characterization of Dentin Surface

                Preparations

                J. Dent. Res. 69 (1990)  127


ACCESSIBILITY